Accuracy is Low

Stargraph should put most celestial objects in the viewfinder (or close to it). If you are consistently finding that targets fall outside the viewfinder, here are some helpful tips.

Improving Accuracy

  1. First, make sure your telescope is level. A solid foundation will have a noticable improvement to Stargraph's accuracy.
  2. Update the mount calibration. To do this, go to the "Configuration" page and select "Begin Calibration".
  3. Verify "Learning mode" is enabled. This will improve accuracy as you use the telescope.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.