Replacing the Batteries

Stargraph requires 2x AAA batteries which will provide 30+ hours of continual use.

Prerequisites

  • A Phillips-head screwdriver
  • 2x AAA Alkaline batteries

Procedure

  1. Remove the single screw underneath the device.
  2. Pull the lid off.
  3. Replace the batteries in the compartment.
  4. Put the lid back on.
  5. Add the screw back, securing the lid to the device.

Hardware Specs

| If you need to replace the screw, it is a standard M3x12 bolt with a Phillips-head interface.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.